Piece of JCW50C Acoustic Batten

JCW50C Acoustic Batten System

The JCW50C Acoustic Batten system is designed for use on concrete subfloors. They can be used within new build and refurbishment projects. Whether working to Robust Details or Pre Completion Testing, JCW Acoustic Batten Systems offer the ideal solution for concrete sub-floors.

The JCW50C Acoustic Batten has a 10mm pre bonded resilient layer which is made from open cell, recycled polyurethane. Standard batten sizes are 50mm overall, however other battens sizes are available to suit any finished floor level that you may require.

The JCW50C Acoustic Batten system offers an exceptional reduction in impact sound and whilst maintaining a high compressive strength.

The JCW50C batten system creates a void beneath the floor allowing services to be installed between battens. It is important however that services do not bridge the resilient layer on the battens.

JCW Acoustic battens can be overlaid with an 18mm (min) tongued and grooved board. This is usually chipboard but can be plywood or engineered hardwood flooring.

A 5mm (min) perimeter edge strip is required around the perimeter. This is to isolate the floating floor from walls and skirting boards.

It is important that the manufacturers recommendations are adhered to for batten centres. Please contact us for further advice on 01204 387 029.

All acoustic battens used by JCW Acoustic Flooring have been tested in a UKAS accredited laboratory.

When installed correctly JCW50C Acoustic Battens will exceed the requirements set out in Part E of the Building Regulations.

With over 10 years of experience in installing all types of acoustic flooring systems, JCW Acoustic Flooring have the knowledge and expertise to ensure that floating floors are installed correctly giving complete peace of mind.