JCW80C Acoustic Battens have been designed for use on concrete sub-floor. They can be used within new build and refurbishment projects.
The JCW80C Acoustic Batten System offers the ideal solution, whether working to Robust Details or Pre Completion Testing.
Designed for concrete subfloors the JCW 80C Acoustic Batten system is the ideal solution, providing exceptional reduction in impact sound and whilst still maintaining a high compressive strength.
JCW80C Acoustic Battens have a 10mm pre bonded resilient layer which is made from open cell, recycled polyurethane. Standard batten sizes are 80mm overall, however other battens sizes are available to suit any finished floor level that you may require.
One advantage of using the JCW80C Acoustic Batten System is that services can be installed within the floor. It is important however that services do not bridge the resilient layer on the battens.
JCW80C Acoustic battens can be overlaid with an 18mm (min) tongued and grooved board. This is usually chipboard but can be plywood or engineered hardwood flooring.
A 5mm (min) perimeter edge strip is required around the perimeter of the floor. This is to isolate the floating floor from walls and skirting.
All acoustic battens used by JCW Acoustic Flooring have been tested in a UKAS accredited laboratory.
When installed correctly JCW Acoustic Batten Systems will exceed the requirements set out in Part E of the Building Regulations.
With over 10 years of experience in installing all types of acoustic flooring systems, JCW Acoustic Flooring have the knowledge and expertise to ensure that floating floors are installed correctly giving complete peace of mind.