The JCW50C Acoustic Batten system is designed for use on concrete subfloors. They can be used within new build and refurbishment projects. Whether working to Robust Details or Pre Completion Testing, JCW Acoustic Batten Systems offer the ideal solution.
The JCW50C Acoustic Batten system has a 10mm pre bonded resilient layer which is made from open cell, recycled polyurethane. Standard batten sizes are 50mm overall, however other battens sizes are available to suit any finished floor level that you may require.
The JCW50C Acoustic Batten system offers an exceptional reduction in impact sound, whilst maintaining a high compression strength.
One advantage of using the JCW Acoustic Batten System is that services can be installed between battens. It is important however that services do not bridge the resilient layer on the battens.
JCW Acoustic battens can be overlaid with an 18mm (min) tongued and grooved board. This is usually chipboard but can be plywood or engineered hardwood flooring.
A 5mm (min) resilient flanking strips is required around the perimeter of the flooring board. This is to isolate the floating floor from walls and skirting.
It is important that the manufacturers recommendations are adhered to for batten centres. Please contact us for further advice on 01204 387 029.
All acoustic battens used by JCW Acoustic Flooring have been tested in a UKAS accredited laboratory.
When installed correctly JCW50C Acoustic Battens will exceed the requirements set out in Part E of the Building Regulations.
With over 10 years of experience in installing all types of acoustic flooring systems, JCW Acoustic Flooring have the knowledge and expertise to ensure that floating floors are installed correctly giving complete peace of mind.
If you need more information or advice about acoustic flooring please call us on 01204 387029, email us or complete the form below.